rev. 0.6 5/08 copyright ? 2008 by silicon laboratories an235 an235 SI4700/01/02/03/08/09 e valuation b oard q uick -s tart g uide thank you for purchasing the silicon laboratories SI4700/01/02/0 3/08/09 fm tuner evaluation board (evb). the evb and associated so ftware have been designed to speed the overall development proc ess and decrease required development time. we look forward to worki ng with you and have posted support articles, answers to frequently asked questions, and application no tes on the si47xx customer support site at www.mysilabs.com . note: a more comprehensive user's guide fo r configuring your system is availabl e on the evb cd (si4 700/01/02/0 3 evalua- tion board user's guide or si4708/09 eval uation board user?s guide) and on the si47xx customer support site. if you have any difficulty or questions about any of the steps below, please consult the evb users guide prior to plugging in your evb. 1. make sure any prior versions of the gui are removed prior to installation of the gui application software shipped with the evaluation board kit. - you can use "add or remove programs" in the windows control panel to remove the old version of the gui. 2. insert the silicon laboratories cd into host cd drive. 3. install the development gui lo cated in cd:\si47xx\setup.exe. - the setup program may prompt to install the dotnetfram ework which is required for the program to function. this may be installed from the dotnetframework directory on the installation cd or from the microsoft website. 4. connect the usb cable to the evaluation board usb connector. 5. make sure that switch sw1 is in the usb position to use usb power. 6. launch the si47xx development gui. general debugging guidelines if your evb is not functional, please refe r to the following troubleshooting tips. 1. make sure the evb is recognized by your pc. right-click on "my comp uter", and select "properties" "hardware" "device manager". under "human interface de vices", select each "hid-compliant device" ?details" entry, and confirm one contains "vid_10c4&pid_8193." 2. if the evb is not recognized by the gui, uninstall .net framework v2.0, and reinstall from mi crosoft's windows update.
disclaimer silicon laboratories intends to provide customers with the latest, accurate, and in-depth documentation of all peripherals and modules available for system and software implementers using or intending to use the silicon laboratories products. characterization data, available modules and peripherals, memory sizes and memory addresses refer to each specific device, and "typical" parameters provided can and do vary in different applications. application examples described herein are for illustrative purposes only. silicon laboratories reserves the right to make changes without further notice and limitation to product information, specifications, and descriptions herein, and does not give warranties as to the accuracy or completeness of the included information. silicon laboratories shall have no liability for the consequences of use of the information supplied herein. this document does not imply or express copyright licenses granted hereunder to design or fabricate any integrated circuits. the products must not be used within any life support system without the specific written consent of silicon laboratories. a "life support system" is any product or system intended to support or sustain life and/or health, which, if it fails, can be reasonably expected to result in significant personal injury or death. silicon laboratories products are generally not intended for military applications. silicon laboratories products shall under no circumstances be used in weapons of mass destruction including (but not limited to) nuclear, biological or chemical weapons, or missiles capable of delivering such weapons. trademark information silicon laboratories inc., silicon laboratories, silicon labs, silabs and the silicon labs logo, cmems?, efm, efm32, efr, energy micro, energy micro logo and combinations thereof, "the world?s most energy friendly microcontrollers", ember?, ezlink?, ezmac?, ezradio?, ezradiopro?, dspll?, isomodem ?, precision32?, proslic?, siphy?, usbxpress? and others are trademarks or registered trademarks of silicon laboratories inc. arm, cortex, cortex-m3 and thumb are trademarks or registered trademarks of arm holdings. keil is a registered trademark of arm limited. all other products or brand names mentioned herein are trademarks of their respective holders. http://www.silabs.com silicon laboratories inc. 400 west cesar chavez austin, tx 78701 usa smart. connected. energy-friendly products www.silabs.com/products quality www.silabs.com/quality support and community community.silabs.com
|
